Optical LNB TOL 32

Universal LNB with fibre optic output for long range coverage
Converts SAT-IF into an optical signal
Minimizes losses on long distances
(max. 0.3dB/km versus 32dB/100m on coax)
7dBm Optical output power supports up to 32 way splitting (32 converters)
Uses 1310 nm technology
Technical specifications
Frequency range
Input frequency range 10,7 – 12.75 GHz
Band stacking, vertical 0.950 – 3.0 GHz
Band stacking, horisontal 3.4 – 5.45 GHz
Polarization Horizontal and vertical
Optical
Wavelength 1310 Nm
Optical output power, (nominal@25 ºC) 7.0 dBm
Equivalent split levels possible (max.) 32 ways
Total loss (nominal) 18.3 dB
Noise figure
Noise figure (typical@25ºC) 0.5 dB
Noise figure (max. @25ºC) 1.1 dB
Noise figure (typ. over temperature) 0.7 dB
Noise figure (max. over temperature) 1.3 dB
Gain
Conversion gain (min.at room temperature) 72 dB
Conversion gain (max.at room temperature) 62 dB
Gain variation (-30 to +60 ºC) ± 2 dB
Gain flatness (0.95 to 5.45 GHz) 5 dB
Gain ripple (per 26MHz bandwidth segment) ≤0.5 dB
Local Oscillator (L.O.)
L.O. frequency, vertical 9.75 GHz
L.O. frequency, horisontal 7.3 GHz
L.O. Phase noise (Offset frequency 1 kHz) -55 dBc/Hz
L.O. Phase noise (Offset frequency 10 kHz) -80 dBc/Hz
L.O. Phase noise (Offset frequency 100 kHz) -100 dBc/Hz
L.O. Phase noise (Offset frequency 1 MHz) -110 dBc/Hz
L.O. Stability, initial setting ± 1 MHz
L.O. Temperature drift (-40 ºC to +60 ºC) ± 2 MHz
L.O. Aging and total drift (10 years) ± 4 MHz
Others
Image rejection (min.) 40 dB
Cross polar isolation (typ.) 30 dB
Cross polar isolation (min.) 25 dB
Spurious output - in band (950MHz-3GHz, 3.4GHz-5.45GHz) -25 dBc
LNB type Universal Wholeband
Supply voltage, nominal 12 V/DC
Supply voltage, maximum survival voltage 25 V/DC
Current consumption < 450 mA
DC-input connector F female
Optical output connector FC/PC
Dimensions
Mounting dimensions / neck diameter 40 mm
Ambient operating temperature range -30 - +60 oC
Storage temperature range -40 - 70 oC
Diametras konverterio laikikliui: 40 mm